Your cart is empty.

E150IRMT: 100m HDMI Matrix Extender Over IP By CAT 5E/6 Cable With IR Transmitter Unit

  • Model: E150IRMT




Product Detail

Introduction

This is a device based on the standard TCP/IP protocol for transmitting HD audio and video source over LAN . It transmits your HD display with the high resolutions up to 200 meters away from your HDMI or DVI-D source by using one CAT5e/6 cable.
 

HDTV REsolution

480p,720p,1080p

Audio

Sample rate:32kHz,44.1kHz,48kHz

IR remote control

38kHz;NEC

HDMI

HDMI 1.3

HDCP

HDCP 1.2

Power adapter

DC5V/1A

Power consumption

HDMI Sender:3W    HDMI receiver:3W

Size(L-W-H)

92x79x28mm

Weight

240g x 2

Operating Temperature/Humidity

0℃-70℃/10%-80%RH(no condensation)

Storage Temperature/Humidity

-10℃-80℃/5%-90%RH(no condensation)

 
 

Interface Diagram:
HDMI Transmitter

 

Port Function
DC/5V Supply power for the transmitter
RESET Hold down the key,the model will re-start
IR-TX Connect IR transmitter to this port
HDMI IN Connect HDMI source to this port
UTP OUT Cat5e/6  cable out
SET Multipoint to multipoint match setting


Connection and operation

1) Connect the HDMI source to the HDMI Transmitter with HDMI cable

2) Use one Cat5e/6 cable up to 100m to connect the Transmitter and the Ethernet Switch

3) Connect the “IR Transmitter into “IR-TX” port on transmitter.

4) Multipoint to multipoint match setting: when multipoint to multipoint connecting and multiple TX and multiple RX connect to the switch , the IP extender can match based on “SET” setting (eg: “SET” of TX is 0001, “SET” of RX is 0001).

 

Application Diagram

Note: For multipoint to multipoint application, please use the gigabit switch with IGMP Multicast function

Package Content

one piece of HDMI transmitter

One pieces of DC 5V power supply

One IR transmitter

User’s Manual