Your cart is empty.

E40704K-IR: HDBaseT Ultra Slim Extender Kit HDR, 4K@60Hz 4:4:4, 40 to 70M

  • Model: E40704K-IR



Product Detail

This Model allows HDMI signals to be transmitted over a Single CAT5e/6 cable. This solution has the added features of RS232 and 2-way IR control functionality over the same CAT5e/6 cable. It can extend 4K@60Hz HDR 10 over a HDBaseT link and upto 40M ! The slimmest HDBaseT design, making it perfect to mount behind ultra thin TVs.

APPLICATIONS:
Household entertainment sharing and control
Lecture room display and control
Showroom display and control
Meeting room presentation and control
Classroom display and control

Interface:
Transmitter:

 

1. HDMI In: Connect to HDMI source equipment such as DVD or Blu-ray player
2. HDMI Out: Connect to a HDMI equipped TV/Monitor for display of the HDMI input source signal
3. IR In: Connect to the supplied IR blaster cable for IR signal transmission.Place the IR blaster in direct line-of-sight of the equipment to be controlled.
4. IR Out: Connect to the supplied IR blaster cable for IR signal transmission. Place the IR blaster in direct line of sight of the equipment to be controlled
5. DC/12-24V: Plug the 24V DC power supply into the unit and connect the adaptor to an AC outlet
6. Update: USB port to update the firmware
7. CAT5e/6 Out: Connect to the receiver unit with a single CAT5e/6 cable for transmission of all data signals
8. EDID: Auto: default 4K@60Hz
Local: copy EDID from display of transmitter
Remote: copy EDID from display of receiver
9 RS232 in: Connect to a PC or laptop with phoenix terminal for the transmission of RS232 commands

Receiver:

 

1. HDMI Out1: Connect to a HDMI equipped TV/Monitor for display of the HDMI input source signal
2. HDMI out2: Connect to a HDMI equipped TV/Monitor for display of the HDMI input source signal
3. IR Out: Connect to the supplied IR blaster cable for IR signal transmission. Place the IR blaster in direct line of sight of the equipment to be controlled
4. IR In: Connect to the supplied IR blaster cable for IR signal transmission.Place the IR blaster in direct line-of-sight of the equipment to be controlled.
5. DC/12-24V: Plug the 24V DC power supply into the unit and connect the adaptor to an AC outlet
6. Update: USB port to update the firmware
7. CAT5e/6 In : Connect to the transmitter unit with a single CAT5e/6 cable for transmission of all data signals
8. RS232 Out: Connect to the device that is to be controlled via phoenix terminal by RS-232 commands

Features
Bandwidth up to 18Gbps, resolution up to 4k @60hz YUV 4:4:4
Transmit up to 70m under 1080p, 40m under 4k
Support HDR10, 3D
With 1x looping HDMI out at Transmitter and 2 x HDMI out at Receiver
Bi-directional wide band IR and RS232 Pass through
Dual POC (Receiver powered by transmitter or transmitter powered by Receiver)
HDCP2.2/ HDCP1.4 Compliant

Diagram:

Speficiation:
Physical Characteristics
Color Black
Housing Metal Enclosure
Operating Temperature -5° ~ 35°C
Power
Input Voltage 125 V
Power Supply (Transmitter) 12 Volt, 2Amp DC Converter
Connector(s)
Transmitter HDMI Input Female, RJ45 Female
Receiver HDMI Output Female, RJ45 Female
Performance
Video Resolution (40m) Maximum 4K*2K@60Hz
Video Resolution (70m) Maximum 1080p@60Hz
IR Control Yes, Bi-directional wide band IR(38KHz-56Khz)
HDCP Compliant Yes, HDCP1.4/2.2
3D Compliant Yes
POC Yes, Receiver Powered by HDBaseT Splitter
Environmental
RoHS Yes
Certification(s)
CE Yes
FCC Yes

PACKAGE CONTENTS:
1 Main unit
2 Operating instructions
3 24V1A DC power supply
4 1xIR TX unit
5 1xIR RX unit
6 2 Phoenix plugs for RS232 cable termination