IR-PR1: IR peep hole receiver - CFL-Proof, Plasma-Friendly

Description:

• This features the ability to pick up a remote control infrared signal and relay it on wires to another location.
• Will relay almost all remote control types (except some B & O and Elite models).
• Priimarily designed for use with mounting in panels, doors, cabinets, etc.
• Can be connected with almost any 3 conductor wire, including Cat 5.
• Requires very little power. Suggest using PS1202 12 VDC (200 mA) for up to to 5 IR21s.
• Up to 10 or IR230s, IR21s and other compatible models cna be connected in a single system.
• Brass and white color bezel supplied.
• Small and CFL and sunlight ready design.

Specifications:

• Infrared carrier frequency: 30-60KHz
• Indoor reception range: 30-40 feet (6-8 meters)
• Nominal reception angle: 50 degrees off axis
• Maximum wire length: 1000ft (300m) or more with larger gauge wire
• Wire requirements: 3 conductors, minimum 24 gauge to 200ft, 22 gauge up to 500ft, 20 gauge to 1000ft
• Power requirements: Unregulated 12VDC, 40mA
• Dimensions: 0.6" x 2" (15mm x 50mm)
• Cut out hole dimensions: 1/2" (12mm)
• Cord length: 75" (2 meters)